Chapter C Chapter C
Maintenance Mode
116
W301-0411E
2.20 Language Selection
This is a function to change the displayed language.
In the maintenance main menu of Fig. 1.3.1, select "Language," and press the <
> key to display the language
selection screen shown in Fig. 2.20.1. To go back to the maintenance main menu, press the <
> key.
The currently selected language is highlighted enclosed by a square frame.
Press the <
> key (scroll up) or the < > key (scroll down) to move the highlight to the desired language, and
press <
> to register the setting.
To go back to the maintenance main menu, press the <
> key.
Fig. 2.20.1 Language selection screen
To Next Page
Loading...
Need help?
General