Tadano AML-C User Manual

Chapter D
Chapter DAdjustment mode
159
W301-0411E
2.4 Swing Angle Adjustment
2.4.1 Swing Angle 1 Zero Adjustment
- By the right (clockwise) swing operation, set the swing angle to the over-front.
- Until "Swing Angle1" and "Zero adjustment value" become highlighted on the LCD (Fig. 2.1.1), press the
<
> key (backward) or the < > key (forward).
Value ZERO SPAN
Swing Angle1 [°] 0.3
0.0 180.0
Detected swing angle 1 Zero adjustment value
- Operate the <
> key (-) and the < > key (+) so that the detected swing angle 1 becomes the zero
adjustment value. When the adjustment angle is reached, press the <
> key to register the adjustment
value.
After the adjustment value is registered, "
" is shown at the left of zero adjustment value.
2.4.2 Swing Angle 2 Zero Adjustment
- Keep the swing positions same as 2.4.1.
- Until "Swing Angle2" and "Zero adjustment value" become highlighted on the LCD (Fig. 2.1.1), press the
<
> key (backward) or the < > key (forward).
Value ZERO SPAN
Swing Angle2 [°] 359.7
0.0
180.0
Detected swing angle 2 Zero adjustment value
- Operate the <
> key (-) and the < > key (+) so that the detected swing angle 2 becomes the zero
adjustment value. When the adjustment angle is reached, press the <
> key to register the adjustment
value. After the adjustment value is registered, "
" is shown at the left of zero adjustment value.

Tadano AML-C Specifications

General

Brand	Tadano
Model	AML-C
Category	Measuring Instruments
Language	English