52
W301-0411E
Chapter B Chapter B
User Mode
4.5.3 Eco mode selection
Select a crane operation mode when Eco mode switch is "ON".
・Eco mode 1 :
In this mode, a crane restricts the maximum engine speed,
consumes less fuel and makes less noise compared with
when Eco mode is "OFF".
・Eco mode 2 :
In this mode, a crane consumes further less fuel and makes
further less noise compared with when Eco mode 1 is
selected.
A crane operation becomes slower by restricting the maximum
engine speed. Select a suitable Eco mode depending on
crane operation.
1. Select the Eco mode selection icon, and then push
the < > key (set).
• The pop-up window for Eco mode selection
appears on the display panel.
2. Push the < > key (backward) or < > key
(forward) to select one of the Eco mode icons.
• The selected icon is highlighted.
3. Push the < > key (set).
• After the registration is completed, the pop-up
window closes and the AML returns to the crane
operation state.
• When Eco mode switch is turned "ON", Eco mode
indicator (Eco mode 1 or Eco mode 2) is
displayed.
When you want to cancel the selection, push the
< > key (EXT). The pop-up window closes
and the AML returns to the crane operation state
without changing registration.
Even after the AML is turned off, the registered
information is retained. When the AML is turned
on, the operation starts with the retained
information.
Fi
. 4.5.2
To Next Page
Loading...
Need help?
General