Tadano AML-C User Manual

Chapter C Chapter C
Maintenance Mode
94
W301-0411E
2.8.3 Selection of MDT Check Menu Item
Table 2.8.1 shows the MDT check items.
Table 2.8.1 MDT check item
Menu item Menu item content
1. Upper Di check Displays the upper Di signal state (refer to 2.8.4).
2. Upper Ai check Displays the upper Ai signal state (refer to 2.8.5).
3. Upper Do check Displays the upper Do signal state (refer to 2.8.6).
4. Lower Di check Displays the lower Di signal state (refer to 2.8.7).
5. Lower Ai check Displays the lower Ai signal state (refer to 2.8.8).
6. Lower Do power check Displays the lower Do power state (refer to 2.8.9).
7. Lower Do check Displays the lower Do signal state (refer to 2.8.10).
8. Lower Ao check Displays the lower Ao signal state (refer to 2.8.11).
9. Pi check 1) Displays the upper/lower Pi signal state (refer to 2.8.12).
1) “Pi check” is displayed in next screen due to the size of LCD.

Tadano AML-C Specifications

General

Brand	Tadano
Model	AML-C
Category	Measuring Instruments
Language	English