Chapter C Chapter C
Maintenance Mode
126
W301-0411E
Error
code
Error name Description
Crane
operation
Transmitter type
improper
(serial port 2)
The type of transmitter connected with port 2 is incorrect.
¯
E1012
Cause: Transmitter malfunction, incorrect connection
Remedy: Connect a proper transmitter to the serial port.
CAN port 1 reception
trouble
The data on the bus connected with the CAN port 1 cannot be
acquired correctly. (Reception abnormality)
{
E1101
Cause: Bus connected with CAN1 is open or short. Device malfunction
Remedy: Perform inspection for the above possible cause.
CAN port 2 reception
trouble
The data on the bus connected with the CAN port 2 cannot be
acquired correctly. (Reception abnormality)
{
E1102
Cause: Bus connected with CAN2 is open or short. Device malfunction
Remedy: Perform inspection for the above possible cause.
To Next Page
Loading...
Need help?
General