STEP EXCITE: Service & maintenance manual - rev. 1.4
Page 9.1
9. MACHINE CONFIGURATION
9.1. USER MENU CONFIGURATION FOR 700 MODELS
The configuration procedure is invoked when the machine is in standby mode by simultaneously
pressing the keys 369 for 700 LED models, whereas on 700 Wellness TV models the keys 0369
must be pressed one after the other. The following prompt appears on the LED display:
ENTER PASSWORD:
To access the procedure, type in the password 2406 and press ENTER to confirm. At this point the
machine display begins showing the current configuration, structured as in the diagram below:
USER MENU
Language
MAX Time
Priority
Distance
Pause Time
TGS
Keys
Custom Mess.
Languages
Change Mess.Lang.
Edit Messages
Default config.
Format P&P
SN
Lubricated
HR
Standby
(only with WTV)
9.1.1. LANGUAGE
After selecting a language from the list of those available, all messages subsequently displayed by
the machine will be in the chosen language. To change the selection, when the display shows the
current setting:
LANGUAGE : xxx
Press the +/- GOAL keys to select the desired language from the options available. Press ENTER
to confirm the choice, use the + or – effort level keys to move to the next or previous parameter.
To Next Page
Loading...
