STEP EXCITE: Service & maintenance manual - rev. 1.4
Page 9.22
9.3.9. FLOORS CLIMBED BETWEEN SUCCESSIVE LUBRICATIONS
This parameter defines the number of floors climbed, to be multiplied by ten, before the chains need
to be lubricated again. To change the selection, when the display shows the current setting:
LUB. Dfloors: XXX
To modify a parameter value, it is necessary to press the ENTER key: when the current parameter
value starts to blink, press the CLEAR key to erase the current value and then use the number keys
to enter the desired new value. Press ENTER to confirm the selection, use the + or – speed keys to
move to the next or preceding parameter.
The default value of this parameter is 16000.
9.3.10. LAST LUBRICATION
This parameter displays the number of floors climbed since the chain was last lubricated. The
display shows:
LAST LUBR: XXX
At the moment when the value of the parameter in user menu 9.1.16. “Lubricated” is changed to
“YES” after lubricating the chain, this param
eter acquires the value of the distance ravelled item
in the “Operating data”.
Use the + or – speed keys to move to the next or preceding parameter.
9.3.11. LUBRICATION NUMBER
This parameter displays the number of lubrication operations performed. The display shows:
N.LUBRIF: XXX
At the moment when the value of the parameter in user menu 9.1.16. “Lubricated” is changed to
“YES” after lubricating the chain, this parameter is incremented by one unit.
Use the + or – speed keys to move to the next or preceding parameter.
9.3.12. TV STANDARD (700I E VERSION ONLY)
This function displays the television standard selected on the machine. To change the selection,
when the display shows the current setting:
TV STANDARD: XXX
Press the +/- GOAL keys to select the desired setting from the available options. Press ENTER to
confirm the selection, use the + or – speed keys to move to the next or preceding parameter. The
available choices are:
PAL B/G SECAM E/L SECAM B/G
PAL I SECAM D/K SECAM K1
PAL N NTSC M44 PAL M
NTSC M PAL D/K
To Next Page
Loading...
