STEP EXCITE: Service & maintenance manual - rev. 1.4
Page 9.7
9.2. USER MENU CONFIGURATION FOR 500 MODELS
The machine configuration procedure is invoked, when the machine is in standby mode, by
simultaneously pressing the keys ENTER, ↑, CLEAR. The following prompt appears on the
display:
ENTER PASSWORD:
To access the procedure, type in the password 2406 and press ENTER to confirm. To enter the
password, increase or decrease the displayed value using the ↑ and ↓ keys, or use the +/- GOAL
keys to scroll through and modify the individual digits.
At this point the machine display begins showing the current configuration, structured as in the
diagram below:
USER CONFIG
Language
MAX time
Distance
Change mess.lang.
Pause time
Default age
Default weight
Default distance
Keys
Custom mess.
HR
TGS
Lubricated
Default config.
Default time
Format P&P
SN
Default calories
9.2.1. LANGUAGE
After selecting a language from the list of those available, all messages subsequently displayed by
the machine will be in the chosen language. To change the selection, when the display shows the
current setting:
LANGUAGE : xxx
Press the +/- GOAL keys to select the desired language from the available options. Press ENTER
to confirm the operation, use the + or – effort level keys to move to the next or preceding
parameter.
To Next Page
Loading...
