Technogym Step 700i E - Default Age

STEP EXCITE: Service & maintenance manual - rev. 1.4
Page 9.9
Press the ENTER key to change the value: The current parameter value starts to blink on the
display; use the ↑ and ↓ keys to increase or decrease the value, or use the +/- GOAL keys to scroll
through and modify the individual digits.
Press ENTER to confirm the operation, use the + or – effort level keys to move to the next or
preceding parameter.
The default value of this parameter is 120.
9.2.6. DEFAULT AGE
It is possible to set the default age for a generic user, ranging from 10 to 99 years. To change the
setting, when the display shows the currently selected default age:
DEFAULT AGE xx
Press the ENTER key to change the value: The current parameter value starts to blink on the
display; use the ↑ and ↓ keys to increase or decrease the value, or use the +/- GOAL keys to scroll
through and modify the individual digits.
Press ENTER to confirm the operation, use the + or – effort level keys to move to the next or
preceding parameter.
The default value of this parameter is 30.
9.2.7. DEFAULT WEIGHT
It is possible to set the default weight for a generic user, ranging from 10 to 99 kilograms. To
change the setting, when the display shows the currently selected default weight:
DEFAULT WEIGHT KG xx
Press the ENTER key to change the parameter: The current parameter value starts to blink on the
display; use the ↑ and ↓ keys to increase or decrease the value, or use the +/- GOAL keys to scroll
through and modify the individual digits.
Press ENTER to confirm the operation, use the + or – effort level keys to move to the next or
preceding parameter.
The default value of this parameter is 70.
9.2.8. DEFAULT DURATION
It is possible to set a maximum duration for the exercise session, with a value ranging from 1 to 999
minutes. To change the setting, when the display shows the current duration:
DEFAULT DURATION MIN. xxx
Press the ENTER key to change the parameter: The current parameter value starts to blink on the
display; use the ↑ and ↓ keys to increase or decrease the value, or use the +/- GOAL keys to scroll
through and modify the individual digits.