STEP EXCITE: Service & maintenance manual - rev. 1.4
Page 9.8
9.2.2. CHANGE MESSAGE LANGUAGE
It is also possible to display the custom standby messages in the language selected with the
preceding parameter. To extend the language setting to the predefined custom standby messages,
when the display is showing the current selection :
CHANGE MESS. LANGUAGE
Press ENTER to confirm the operation, use the + or – effort level keys to move to the next or
preceding parameter.
9.2.3. UNITS OF MEASUREMENT
It is possible to choose between EUROPEAN units (kg and km) or IMPERIAL units (pounds and
miles). To change the selection, when the display shows the current setting:
UNITS : xxx
Press the +/- GOAL keys to select the desired unit of measurement from the options listed in the
table below:
UNITS
KG <default>
POUNDS
Press ENTER to confirm the operation, use the + or – effort level keys to move to the next or
preceding parameter.
9.2.4. MAXIMUM EXERCISE TIME
It is possible to set a maximum duration for each exercise, ranging from 1 to 9999 minutes. To
change the setting, when the display shows the currently selected duration:
MAX. DURATION : xxx
Press the ENTER key to change the value: The current parameter value starts to blink on the
display; use the ↑ and ↓ keys to increase or decrease the value, or use the +/- GOAL keys to scroll
through and modify the individual digits.
Press ENTER to confirm the operation, use the + or – effort level keys to move to the next or
preceding parameter.
The default value of this parameter is 9999.
9.2.5. PAUSE TIME
It is possible to set a maximum pause time for each exercise, ranging from 10 to 999 seconds. To
change the setting, when the display shows the currently selected maximum time:
PAUSE TIME xxx
To Next Page
Loading...
