Technogym Step 700i E - Hour

STEP EXCITE: Service & maintenance manual - rev. 1.4
Page 9.15
TIMES AND DATE
Day (DD)
Minutes (MM)
SET CLOCK ?
Month (MM)
Year (YYYY)
Hours (HH)
9.3.1.1. Hour
This parameter sets the hour of the internal clock.
9.3.1.2. Minutes
This parameter sets the minutes of the internal clock.
9.3.1.3. Day
This parameter sets the date of the internal clock.
9.3.1.4. Month
This parameter sets the month of the internal clock.
9.3.1.5. Year
This parameter sets the year of the internal clock.
9.3.1.6. Set Clock
This item is used for programming the internal clock chip with the values entered previously. To do
this, when the display shows:
SET CLOCK
press the ENTER key.
9.3.2. LOW KIT PARAMETER
This function provides access to parameters used for modifying certain settings of the lower
assembly. To access this menu, when the display shows:
LOW KIT PARAM.
Press ENTER. This function is structured as follows: