STEP EXCITE: Service & maintenance manual - rev. 1.4
Page 9.24
9.3.14. WAITING TIME
It is possible to configure the amount of time, in minutes, the machine will wait before activating
the screen saver, with values ranging from 10 to 9999. To change the setting, when the LED matrix
shows the current time:
WAITING TIME : xxx
Press the ENTER key to change the parameter: the current value of the parameter will start to
blink, at this point press the CLEAR key to erase the current value and then enter one digit at a
time using the ↑ and ↓ keys to change the value and the +/- GOAL keys to scroll to the next
character.
Press ENTER to confirm the changes made, and use the + or – speed keys to move to the next or
preceding parameter.
The default value of this parameter is 10.
To Next Page
Loading...
