STEP EXCITE: Service & maintenance manual - rev. 1.4
Page 9.21
LOW KIT MENU
Low Kit Version
Low Kit fault code
9.3.6.1. Low kit version
This function displays the brake board firmware version. To access this menu, when the display
shows:
LOW KIT VERSION
press ENTER, the following message appears:
H:x L:x B:x
Which identifies the firmware version.
9.3.6.2. Low Kit fault code
This function displays the error code that is blocking the low kit. To access this menu, when the
display shows:
LOW KIT FAULT CODE
press ENTER, the following message appears:
FAULT=XX
In case of FAULT=00, the board is not in an error condition.
9.3.7. HIGH KIT VERSION
This function displays the SW version of the display. To do this, when the display shows:
HIGH KIT VERSION
press ENTER, the message that identifies the SW version, will appear.
9.3.8. BOOT VERSION
This function displays the BOOT version. To do this, when the display shows:
BOOT VERSION
press ENTER to display the message which identifies the BOOT version.
To Next Page
Loading...
