STEP EXCITE: Service & maintenance manual - rev. 1.4
Page 10.4
10.3.8. CHECKING THE PLAY OF THE LEVER AND PEDAL GROUP
1. Choose a manual training session with difficulty level 1. Step onto the pedals and start using the
machine, moving the weight of your body backward and forward, to the right and left. Check
whether the lever and pedal group follows these shifts in body weight with an excessive amount
of play. If this is the case, replace the lever or pedal group.
10.3.9. CHECKING THE DISPLAY
1. Check the operation of all the keys on the keyboard.
2. Check the operation of all the LEDs and the buzzer.
10.3.10. CHECKING THE WIRING AND CONNECTIONS
1. Check the condition of all the cables:
• External conditions;
• Possible rusting of the connectors;
• Electrical continuity of the individual wires;
• Isolation of the individual wires toward ground.
Repair and/or replace any non-conforming wires.
Only for 500i, 700i and 700i E models.
2. Check the condition of the fuses using a tester.