Technogym Step 700i E - Enable Keyboard

STEP EXCITE: Service & maintenance manual - rev. 1.4
Page 9.11
9.2.12. ENABLE TGS
It is possible to enable or disable the use of the TGS reader. To change the selection, when the
display shows the current setting:
TGS : xxx
Press the +/- GOAL keys to select the desired option out of those listed in the table below:
TGS
ENABLED <default>
DISABLED
Press ENTER to confirm the operation, use the + or – effort level keys to move to the next or
preceding parameter.
9.2.13. ENABLE KEYBOARD
It is possible to disable the keyboard so that the machine can only be used with the TGS. To change
the selection, when the display shows the current setting:
KEYS : xxx
Press the +/- GOAL keys to select the desired option out of those listed in the table below:
KEYS
ENABLED <default>
DISABLED
Press ENTER to confirm the operation, use the + or – effort level keys to move to the next or
preceding parameter.
9.2.14. ENABLE CUSTOM MESSAGES
It is possible to configure whether a custom message is displayed when the machine is in the
standby state. To change the selection, when the display shows the current setting:
CUSTOM MESS. : xxx
Press the +/- GOAL number keys to select the desired option out of those listed in the table below:
CUSTOM MESS.
YES <default>
NO
Press ENTER to confirm the operation, use the + or – effort level keys to move to the next or
preceding parameter.