CONTROLS
2A-1
SECTION 2A. SERVICE TOOLS, MATERIALS, AND SPECIFICATIONS
MATERIALS REQUIRED
l
SPECIFICATIONS
Throttle
Engine low idle speed .................................... 1750 rpm
Engine high idle speed................................... 3220 rpm
Neutral Switch
Neutral switch ......................................Normally closed
Traction Pedal
Transport speed............................. 10 mph (16.1 km/h)
Parking Brake
Brake pedal free play...... 0.750 to 1.5 in (19 to 38 mm)
Parking brake switches .......................... Normally open
Tools required:
Standard automotive hand tools
Cleaning
materials:
Stoddard solvent or equivalent
Detergent and water
Lubricants:
Refer to Section 11
2A
To Next Page
Loading...
Need help?
General
