Textron Jacobsen 600 Series - Materials Required; Service Tools, Materials, and Specifications; Specifications; Wheels and Tires

WHEELS AND TIRES
7A-1
SECTION 7A. SERVICE TOOLS, MATERIALS, AND SPECIFICATIONS
MATERIALS REQUIRED
l
SPECIFICATIONS
Tire Pressure
Front tire pressure................................. 14 psi (96 kPa)
Rear tire pressure ................................. 14 psi (96 kPa)
Deck caster wheel tire pressure............ 14 psi (96 kPa)
Flail deck caster wheel tire pressure... 22 psi (152 kPa)
Tire Size
Front............................................... 23 x 10.5 x 12 4 ply
Rear .................................................... 18 x 18 x 8 4 ply
Deck caster ........................................ 11 x 4.0 x 5 4 ply
Torques
Front wheel bolt...................................55 ft-lbs (75 Nm)
Rear wheel bolt .................................80 ft-lbs (108 Nm)
Tools required:
Standard automotive hand tools
Cleaning
materials:
Stoddard solvent or equivalent
Lubricants:
Refer to Section 11
Other service
items:
Commercial tire sealant
Tire pressure gauge
Compressed air source with inflation tool
7A