Telephone Modem
94 Administrator Guide v 2.2 Thermo Scientific Smart-Vue
®
Wireless Monitoring Solution
18.5 Activating your
USB Telephone Modem
Follow these steps to install your modem on the Smart-Vue Server
computer:
1. Insert the provided Smart-Vue installation CD-ROM into the drive. If
the installation application does not start automatically, navigate to the
drive using the Windows Explorer and double-click on the Start.exe in
the root of the CD-ROM.
2. Click on Install phone modem driver, the fifth option from the top.
3. Click on Next to run the installation wizard, and Continue anyway if
Windows indicates that the software has not passed Windows logo
testing.
4. Click on Finish to complete the process and close the wizard.
5. Plug the modem into an available USB port on the Smart-Vue Server
computer.
6. When Windows displays the Found New Hardware Wizard, it will
prompt you to locate the driver. Click on Yes, this time only (or
equivalent message, depending on your Windows version) Next
Install the software automatically Next
7. The wizard displays a message indicating that is installing a U.S.
Robotics V.92 USB Voice Modem.
8. If prompted click on Continue anyway to proceed Finish after the
wizard has finished.
9. The modem is now ready for use.
18.6 Confirming Driver
Installation in Windows
The installation procedure does not necessarily require you to reboot the
computer, but we recommend that you reboot it to ensure that the driver is
properly installed.
1. Reboot the Smart-Vue Server computer after installing the modem as
described in the previous section.
2. On the Windows desktop, right-click on My Computer Manage
Device Manager
To Next Page
Loading...
Need help?
General