Thermo Scientific Smart-Vue - Multi-Instance Installations

CloudPush
Thermo Scientific Smart-Vue
®
Wireless Monitoring Solution Administrator Guide v 2.2 99
19.2 Multi-instance
Installations
A multi-instance Smart-Vue system is one in which several distinct instances
of the Smart-Vue service modules are running on a single server computer.
You must perform the following steps for each Smart-Vue Server instance
that you wish to synchronize with the Cloud service.
19.2.1 Changes in the
Smart-Vue Server Folder
19.2.1.1 Change the
Configuration file for each
Smart-Vue Server instance
1. Open the Smart-Vue Server folder:
[Disk]:\SmartVue\svuserver\
2. Open the following configuration file:
SmartVueServer.ini
3. Add the following sections to the ThermoServer.ini file:
[CLOUDIDGEN]
DBName=thermoCloudIdGen
DBport=33006
DBhost=temperatureweb.com
DBuser=oceacloud
DBpwd=TmFmZSQ1Mw
HTTPOPTIONS]
useproxy=
proxyhost=
proxyport=
proxyuser=
proxypwd=
4. Save your changes and then close the configuration file.
19.2.1.2 Copy the CloudPush
Application
Copy the following file:
CloudPush.exe
Into the Smart-Vue Server folder:
[Disk]:\SmartVue\svuserver\