CO2 and Temperature Module (with Dual External Sensors)
Thermo Scientific Smart-Vue
®
Wireless Monitoring Solution Administrator Guide v 2.2 27
5 CO
2
and
Temperature
Module (with Dual
External Sensors)
5.1 Package Contents • Smart-Vue wireless monitoring module with battery – 3.6 V Lithium,
3600 mA
• Dual module with CO
2
and temperature sensors
CAUTION: The Smart-Vue module and its wireless features are powered
by the unit’s battery. Although the AC adapter plugs into the Smart-Vue
module, this power is used only by the external CO
2
/temperature sensor.
• 4-wire flat ribbon cable to connect Smart-Vue with sensor module
• Calibration certificate (if purchased with calibration option)
downloadable on-line directly from within Smart-Vue Client software
• Smart-Vue mounting kit with plastic holder, magnet, screws, cable ties,
plastic cable holders and Velcro®
• Documentation CD-ROM
5.2 CO
2
/Temperature
Module Specifications
• Measured ranges: Temperature: 0°C to +50°C (+32° to +122°F); CO
2
: 0
to 9% CO
2
• Digital sensor with 4 leads
• Dimensions: 79.5 x 76.5 x 45.5 mm (3.1 x 3.0 x 1.8 in.)
• Flat cable length: 0.85 m (33.36 in.)
• Connector with 4 gold pins between sensor and wireless module
• Temperature measurement uncertainty: +/- 0.3°C without calibration
and +/- 0.15°C after calibration (+10°C to +40°C)
• Resolution: 0.0625°C
• IP44 protection, plastic casing (ABS, Polycarbonate) with PTFE filter, 0
to 90% RH non condensing for indoor use
To Next Page
Loading...
