Smart-Vue Module Overview and Installation
Thermo Scientific Smart-Vue
®
Wireless Monitoring Solution Administrator Guide v 2.2 7
1 Smart-Vue
Module Overview
and Installation
This section of the Administrator Guide provides general information on
how to install the different variants of the Smart-Vue module. Detailed
information is provided in the following documents provided with your
solution:
• Smart-Vue Client 2.2 Software User Manual
• Installation guide for Smart-Vue Server/Smart-Vue Client 2.2 software
and USB Wireless Receiver
• Administrator Guide for Smart-Vue 2.2 (this guide)
All Smart-Vue modules share common features and are configured in nearly
the same manner as each other. Specific features for the different Smart-Vue
module are described in the following chapters, namely:
• Temperature (internal and external digital sensor modules)
• Temperature / humidity (dual external sensors)
• PT100 (external sensor)
•CO
2
and temperature (dual external sensors)
• Differential pressure (internal sensor)
• 4-20 mA (external sensor)
• Dry contact (external sensor)
1.1 Common Smart-Vue
Features
• Configurable data logging, wireless transmission and alerts
• Automatic wireless set-up
• Wireless range:
• Indoors: 25-100 meters (82-328 ft.); up to 400 meters (1,312 ft.) with 3
repeaters
• Line-of-sight: approximately 700 meters (2,300 ft.)
• Operating temperature range for wireless module: 0°C to +50°C
• Calibration certificate downloadable on-line directly from within
Smart-Vue Client software (for all Smart-Vue modules calibrated by
Thermo Scientific, except calibrations based on the ISO / IEC 17025
standard)
To Next Page
Loading...