Smart-Vue Module Overview and Installation
12 Administrator Guide v 2.2 Thermo Scientific Smart-Vue
®
Wireless Monitoring Solution
enables each Smart-Vue module to establish the optimal connection to
your receiver.
Figure 3. Start installation with modules closest to your receiver and
work your way “out” in concentric circles
CAUTION: Automatic installation is generally advised for use with
relatively small systems of up to about 15 end-points. More importantly,
there should only be one receiver present nearby. If other systems are within
wireless range, there is a chance that automatic installation will connect the
module to a different receiver than the one you expect. For larger systems, or
systems with several receivers, we recommend manual installation using
Smart-Vue Client software.
Also, after automatic configuration, we recommend that you verify, in
Smart-Vue Client, that modules are not being used as repeaters for other
modules, unless absolutely necessary.
1.8 Preparing Mounting
Kit with a Magnet
(Optional)
Your Smart-Vue module includes a holder so you can mount the device
easily on various surfaces. In addition to the provided screws, you will also
find a magnetic pad with adhesive backing that you can attach to the holder
and then use to adhere the holder to metal surfaces easily.
To Next Page
Loading...
Need help?
General