Thermo Scientific Smart-Vue - Wireless Setup

Smart-Vue Module Overview and Installation
14 Administrator Guide v 2.2 Thermo Scientific Smart-Vue
®
Wireless Monitoring Solution
1.10 Wireless Setup
1.10.1 Automatic One-Button
Installation
Smart-Vue modules feature an automatic wireless setup feature that enables
you to add a new Smart-Vue module to your wireless network just by
pressing the button on the front of your module.
CAUTION: This installation method is designed for networks with up to
about 15 end-point modules. After installation, we recommend that you
verify wireless paths in Smart-Vue Client to ensure that modules are
connected to the expected receiver and that other modules are not being
used as repeaters unless absolutely necessary.
This procedure is described in detail in Configuring and managing
modules / sensors in the Smart-Vue Client Software User Manual provided
with your solution.
1.10.2 Manual Wireless Setup For greater control over module installation, and for larger wireless
monitoring systems, it is preferable to install modules manually via the
Smart-Vue Client software.
CAUTION: This procedure is described in detail in both the Configuring
and managing modules / sensors in the Smart-Vue Client Software User
Manual and the Smart-Vue Server/Smart-Vue Client Installation Guide
provided with your solution.