CloudPush
96 Administrator Guide v 2.2 Thermo Scientific Smart-Vue
®
Wireless Monitoring Solution
19 CloudPush How it works:
1. Your Smart-Vue wireless sensors capture data, which is stored in a
database on the Smart-Vue server computer.
2. “CloudPush” runs as a service alongside Smart-Vue Server, on the same
computer. CloudPush replicates user information and sensor
parameters, following user or sensor settings changes, and alarms in case
of alarms. CloudPush replicates readings on the Cloud service regularly
(every 15 minutes).
Note When CloudPush is first started, it replicates all user information and
sensor parameters. Readings and alarms are replicated from the previous 24
hours.
3. Use the Smart-Vue mobile application on your iOS or Android
smartphone or tablet to access the information on the Cloud, entering
your regular Smart-Vue user ID and password when prompted, plus the
Cloud ID (described in the next sections).
Figure 54. Smart-Vue sensor data is stored on the server and then
replicated on the Cloud.
19.1 Installing the
CloudPush Server
Component
This section describes how to install the CloudPush service on your
Smart-Vue Server computer. The actions described here must be carried out
on the server computer running Smart-Vue Server for your Smart-Vue®
wireless monitoring system.
To Next Page
Loading...
Need help?
General