Power-over- Ethernet (POE) TCP/IP Receiver
Thermo Scientific Smart-Vue
®
Wireless Monitoring Solution Administrator Guide v 2.2 65
• Mounting kit
• Smart-Vue Server/Smart-Vue Client CD-ROM with the following:
• Smart-Vue Server/Smart-Vue Client software for configuring and
managing your network
• Technical manuals, including installation guides and the complete
Smart-Vue Server/Smart-Vue Client Software User Manual
13.3 Specifications • ISM (Industrial Scientific Medical) band with 4 frequencies: US/CAN
915 MHz; Europe 868 MHz; APAC 434 MHz; India and other
countries 867 MHz
• Channel width: 50 kHz
• Frequency deflection: 16 KHz
• Wireless transmission speed: 9600 Baud in NRZ mode
• Modulation type: GFSK
• Driven receiver sensitivity for BER = 1%: -107dbm to -110 dBm
• Driven transmission: 8 dBm to 10 dBm
• Power output: 25 mW or 25 mW/500 mW with automatic switching
(depending on model) for 868, 867, and 915 MHz; 10 mW for 434
MHz
• Power adaptor with 1.85 meter (6 ft) cable length and four different
international plugs, 50/60 Hz, 100-240 V AC
• Ethernet 10/100 Mbit (RJ-45)
• Casing: ABS plastic with IP40 protection for indoor use
• Operating conditions: 0°C to +50°C (+32° to +122°F); 0 to 90% RH,
non- condensing
• Size: 190 x 52 x 30 mm (7.4 x 2 x 1.2 in.)
• Weight: 165 g (5.8 oz.)
13.4 Product Overview Installed on your Ethernet network, Smart-Vue Network PoE Receivers
provide a link to transfer data between your system’s Smart-Vue Server
application and groups of Smart-Vue wireless end-point modules. The
Smart-Vue modules automatically and wirelessly transmit measurement data
collected from various types of sensors, as well as alarms in case anomalies
are detected.
To Next Page
Loading...
Need help?
General