Temperature/ Humidity Module (with Dual External Sensors)
18 Administrator Guide v 2.2 Thermo Scientific Smart-Vue
®
Wireless Monitoring Solution
3 Temperature/
Humidity Module
(with Dual External
Sensors)
3.1 Package Contents • Smart-Vue wireless monitoring module with battery – 3.6 V Lithium,
3600 mA
• Dual module with humidity and temperature sensor
• 4-wire cable to connect Smart-Vue with an external sensor
• Smart-Vue mounting kit with plastic holder, magnet, screws, cable ties,
plastic cable holders and Velcro®
• Flat cable (extension for door gasket)
• Calibration certificate (if purchased with calibration option)
downloadable on-line directly from within Smart-Vue Client software
• Documentation CD-ROM
3.2 Humidity/
Temperature Module
Specifications
• Measured ranges:
Temperature: -40°C to +100°C (-40°F to +212°F)
Relative humidity from 0 to 100%
• Digital sensor with 4 leads
• 33 x 11.6 mm (1.3 x 0.5 in.) plastic casing with PTFE filter
• Cable length: 0.80 m (31.5 in.)
• Connector with 4 gold-plated pins between sensor and wireless module
• Temperature measurement uncertainty: +/- 0.3°C without calibration;
+/- 0.15°C after calibration (+10°C to +40°C)
• Humidity measurement uncertainty: +/- 2% RH after calibration (10%
to 90% RH)
• Resolution: 0.0625°C and 0.1% RH
• Protection: IP67 (sensor), IP40 (connector)
3.3 Module Presentation The Smart-Vue wireless humidity/temperature module is a dual-function
device that monitors both relative humidity levels and temperature. This
module is generally used in various types of storage, medical and traceability
To Next Page
Loading...
Need help?
General