TCP/IP Receiver
Thermo Scientific Smart-Vue
®
Wireless Monitoring Solution Administrator Guide v 2.2 45
12 TCP/IP Receiver The Smart-Vue TCP/IP Network Receiver plugs into your local Ethernet
network and collects data wirelessly from various types of Smart-Vue
modules, including temperature, humidity and other sensors, and transfers
it to the Smart-Vue Server data monitoring software.
Network receivers are particularly useful when you need to read sensors in
one or more groups of Smart-Vue modules that are located remotely from
the Smart-Vue Server computer used to monitor the data.
CAUTION: This receiver includes an automatic TCP/IP connection
feature. Installation requires knowledge of your organization’s IP addresses,
particularly static IP addresses. If you do not have access to this information,
contact your system administrator for help before starting this installation.
12.1 Package Contents • Smart-Vue Network Receiver module
• RJ-45 Ethernet cable - 2 m (6.5 ft)
• AC adapter (100v-240 V AC 50/60 Hz to 5 V DC 1 Amp, four
international plugs)
• External antenna
• Mounting kit
12.2 Product Overview Installed on your Ethernet network, Smart-Vue network receivers provide a
link to transfer data between your system’s Smart-Vue Server application and
groups of Smart-Vue wireless modules. The Smart-Vue modules
automatically and wirelessly transmit measurement data collected from
various types of sensors, as well as alarms in case anomalies are detected.
12.2.1 Smart-Vue Network
Receiver
A network receiver:
• Collects data transmitted by end-point modules and forwards it via a
receiver module to the Smart-Vue Server database (from which users
manage and access their end-point modules transparently using
Smart-Vue Client software)
• Transmits configuration and on-demand read requests from the client
software to end-modules
• Includes a 10/100BT RJ-45 connector
• Has a range from 25-100 meters (65-325 ft.) indoors up to
approximately 700 meters (2,300 ft.) in line of sight
To Next Page
Loading...
Need help?
General