TCP/IP Receiver
46 Administrator Guide v 2.2 Thermo Scientific Smart-Vue
®
Wireless Monitoring Solution
• The number of end-point modules supported through a receiver
depends on your system configuration. Please check with a qualified
technician for more information.
Figure 29. Network receiver overview
12.2.2 Typical Installation The following diagram shows two examples of a typical installation with
network receivers.
Figure 30. Network receivers may be placed anywhere in your network
12.2.3 How it Works The Smart-Vue network receiver enables you to access remote modules from
the Smart-Vue Client monitoring application. Once installed, this receiver
operates transparently as if it were connected directly to your Smart-Vue
Server computer, like a USB receiver. The only difference is that the
network receiver resides on your Ethernet network and communicates via
TCP/IP.
To Next Page
Loading...
