Standalone Repeater
74 Administrator Guide v 2.2 Thermo Scientific Smart-Vue
®
Wireless Monitoring Solution
14 Standalone
Repeater
A repeater device extends the range between wireless modules and receivers
in your Smart-Vue monitoring system. These instructions describe how to
add the new repeater to your existing network quickly and easily.
14.1 Package Contents • Standalone wireless repeater module
• Antenna
• AC adapter (100-240 V AC – 5 V DC, cord length: 185 cm/6 ft.)
• Mounting kit with Velcro®, cable ties and cable holders
• Documentation CD-ROM
14.2 Product Overview • Smart-Vue standalone wireless repeater that relays data to extend the
wireless range between devices
• Wireless range:
• Indoors: 25-100 meters (82-328 ft.); up to 400 meters (1,312 ft.)
with 3 repeaters
• Line-of-sight: approximately 700 meters (2,300 ft.)
• Up to 3 repeaters may be cascaded in a given network branch
14.3 Specifications • ISM (Industrial Scientific Medical) band with four frequencies:
US/CAN 915 MHz; Europe 868 MHz; APAC 434 MHz; India and
other countries 867 MHz
• Channel width: 50 kHz
• Frequency deflection: 16 KHz
• Transmission speed: 9600 Baud in NRZ mode
• Modulation type: GFSK
• Driven receiver sensitivity for BER = 1%: -107dbm to -110 dBm
• Driven transmission: 8 dBm to 10 dBm
• Power output: 25 mW or 25 mW/500 mW with automatic switching
(depending on model) for 868, 867, and 915 MHz; 10 mW for 434
MHz
• Casing: ABS plastic with IP54 protection for indoor use
• Operating conditions: 0°C to +50°C (+32° to +122°F); 0 to 90% RH,
non- condensing
• AC adapter (100-240 V AC – 5 V DC)
To Next Page
Loading...
