Power-over- Ethernet (POE) TCP/IP Receiver
Thermo Scientific Smart-Vue
®
Wireless Monitoring Solution Administrator Guide v 2.2 69
crossed-cable. The receiver does not need to be placed in its final location
for this operation, but it does need to be accessible over the network.
Smart-Vue PoE network receivers are delivered with a default IP address to
ensure that you can access them. The default IP address is: 192.168.0.100.
CAUTION: The process described in this section requires knowing an
available static IP address and ensuring that the IP address is the same
classification (class) as 192.168.0.x. Contact your system administrator for
assistance.
To adapt the network receiver to your network, do the following:
1. Open your Internet browser (i.e. Internet Explorer).
2. Type 192.168.0.100 in the address bar, and then press Enter on your
keyboard.
Depending on your receiver, you may have to enter a login/password. Enter
the following to continue (case sensitive characters) and then click on OK.
User name: admin
Password: PASS
3. In the main Lantronix EVOLUTION OS™ window (embedded
software interface in PoE receiver module),
click on Network Configuration:
Figure 39. Network configuration interface
To Next Page
Loading...
Need help?
General