Wireless Siren
84 Administrator Guide v 2.2 Thermo Scientific Smart-Vue
®
Wireless Monitoring Solution
I moved my siren. Why doesn’t it work anymore?
First, make sure the unit is plugged in correctly to the AC power adapter
and that the adapter is plugged into a live outlet. Also, due to its casing, the
wireless range on the siren is about half that of the Smart-Vue end-point
modules and repeaters. Make sure your device is still within wireless range
by running a signal strength test in Smart-Vue Client (press F8 or click on
Alarms). Click on the plus (+) sign, click on the siren you wish to check,
and click on Power.
What is an acceptable wireless signal strength for my siren?
We recommend that each all devices in the system show a value of 40% or
better when you click on the Signal button in Smart-Vue Client. Better
signal strength results in better system performance.
To Next Page
Loading...
Need help?
General