Topcon ES-101 - Page 307

297
37. SPECIFICATIONS
Minimum display:
Fine/Rapid measurement : 0.001m (0.005ft / 1/8inch)
Tracking measurement: 0.01m (0.1ft / 1/2inch)
Maximum slope Prism/ reflective sheet: 7,680m (25,190ft)
distance display: Reflectorless: 768m (2,510ft)
Distance unit: m/ft/inch (selectable)
Accuracy:
(Using prism)
Fine measurement: (2 + 2 ppm X D) mm
*5
Rapid measurement: (5 + 2 ppm X D) mm
*5
(Using reflective sheet target)
*4 *6
Fine measurement: (3 + 2 ppm X D) mm
Rapid measurement: (5 + 2 ppm X D) mm
(Reflectorless (White))
*7
Fine measurement:
(3 + 2ppm X D) mm (0.3 to 200m)
*5
(5 + 10ppm X D) mm (over 200 to 350m)
(10 + 10ppm X D) mm (over 350 to 500m)
Rapid measurement:
(6 + 2ppm X D) mm (0.3 to 200m)
*5
(8 + 10ppm X D) mm (over 200 to 350m)
(15 + 10ppm X D) mm (over 350 to 500m)
(Reflectorless (Gray))
*8
Fine measurement
(3 + 2ppm X D) mm (0.3 to 100m)
*5
(5 + 10ppm X D) mm (over 100 to 170m)
(10 + 10ppm X D) mm (over 170 to 220m)
Rapid measurement:
(6 + 2ppm X D) mm (0.3 to 100m)
*5
(8 + 10ppm X D) mm (over 100 to 170m)
(15 + 10ppm X D) mm (over 170 to 220m)
Measurement mode: Fine measurement (single/repeat/average)/
Rapid measurement (single/repeat)/Tracking
(selectable)
Measuring time:
Fine measurement: 1.7 sec + every 0.9 sec.
Rapid measurement 1.4 sec + every 0.7 sec.
Tracking measurement: 1.4 sec + every 0.3 sec.
Atmospheric correction:
Temperature input range:- 35 to 60°C (in 0.1°C step)/ - 31 to 140°F (in
1°F step)