5. BASIC OPERATION
24
*7 Laser-pointer/Guide light display
Selecting Laser-pointer/Guide light: "33.2 EDM Settings", Switching
Laser-pointer/Guide light ON/OFF : "5.1 Basic Key Operation"
:Laser-pointer is selected and ON
:Guide light is selected and ON
*8 Bluetooth communication status
: Connection established (“Mode” is set to “Slave”)
: Connection established (“Mode” is set to “Master”)
(flashing): Connecting (“Mode” is set to “Slave”)
(flashing): Connecting (“Mode” is set to “Master”)
(flashing): Waiting
(flashing): Disconnecting ("Mode is set to "Slave")
(flashing):Disconnecting (“Mode” is set to “Master”)
: Bluetooth device is OFF (“Mode” is set to “Slave”)
: Bluetooth device is OFF (“Mode” is set to “Master”)
*9 Appears when laser beam is emitted for distance measurement
*10 Input mode
:Inputting capital letters and figures.
:Inputting small letters and figures.
:Inputting numbers.
To Next Page
Loading...
