- 95 -
(2) “SF” Command
When the measurement is conducted by order of ST command, the measured data is returned with text
data from the instrument as follows;
Line No. Output data Remarks
1. 100 Integral time (milli-second)
2. 2 Measuring field (degree)
3. 100 Integral time (milli-second)
4. 9.335E-01 Radiance (W•m
-2
•sr
-1
)
5. 1.490E+02 Luminance (cd/m
2
)
6. 1.631E+02 Tristimulus values X
7. 1.490E+02 Tristimulus values Y
8. 5.374E+01 Tristimulus values Z
9. 0.4458 Chromaticity x
10. 0.4073 Chromaticity y
11. 0.2549 Chromaticity u’
12. 0.5240 Chromaticity v’
13. 2882 Correlated color temperature (K)
14. 0.0002 Deviation
15. 380 2.141231E-04 Wavelength (nm), Spectral radiance (W•m
-2
•nm
-1
•sr
-1
)
16. 381 2.420037E-04
… ･･･････････････････
414. 779 4.325765E-03
415. 780 4.294558E-03
416. END Data end command
* When measurement is done in the spectral radiance mode (D0 ST), the data from the first line to
the 416th line in the above table are returned.
* When measurement is done in the colorimetry mode (D1 ST), the data from the first line to the
14th line and the data of the 416th line in the above table are returned.
To Next Page
Loading...
Need help?
General
