Topcon SR-LEDW User Manual

- 6 -
Indication of LC Display Unit
• The initial display
Indicated when turning on the power or pressing the reset switch.
＊＊ Ｓｔａｒｔ SR-UL1R ＊＊
∙ The SR-3AR display “Start SR-3AR” in the initial display
• The display during measurement
Indicated during measurement
＊ Ｍｅａｓｕｒｉｎｇ ＊
ＩｎｔｅｇＴｉｍｅ＝ １００
• Measurement Cancellation
If want to stop measuring, press the [MEAS./HOLD] switch. And then can see the following display,
measurement is stopped.
• The display of measurement values
Indicated after measurement
Integral time: millisecond
＃１０ ＡＵＴＯ ＡＢＳ ２．０Ｃ
ｘ ＝ ０．４４７６［ｆ１］ ２．０
ｙ ＝ ０．４０７４
Ｌｖ＝８．９４０Ｅ＋０１ ｃｄ／ｍ＾２
Chromaticity coordinates x
Luminance
/chromaticity
coordinates mode
Lv, x, y
Chromaticity coordinates y
Luminance Lv
＃１０ ＡＵＴＯ ＡＢＳ ２．０
ｕ’＝ ０．２５６０ ２．０
ｖ’＝ ０．５２４３
Ｌｖ＝８．９４０Ｅ＋０１ ｃｄ／ｍ＾２
Chromaticity coordinates u’
Luminance
/chromaticity
coordinates mode
Lv, u’, v’
Chromaticity coordinates v’
Luminance Lv
Number
Measurement mode
Absolute/Difference
The current measuring field
Correction factor
None: No correction factor applied
[f1]: Spectral correction applied
[fx]: XYZ correction applied
[ff]: Spectral & XYZ correction applied
#10 AUTO ABS ２. 0
ｘ ＝ ０．４４７６ 2. ０
ｙ ＝ ０．４０７４
＊Canceled Measuring
Measuring field to be measured
Note
The current
color matching function type

Topcon SR-LEDW Specifications

General

Brand	Topcon
Model	SR-LEDW
Category	Measuring Instruments
Language	English