Change the data communication methods.
For the pound sign (#), use 0 for normal type and 1 for CS900 type.
Reads the data communication methods.
The instrument is in the measurement status.
When measurement is done, the measured data is returned with comma
separated text data.
For the pound sign (#), set the measurement data type from 1 to 8.
1: Luminance, Chromaticity xy 2: Luminance, Chromaticity u’v’
3: Tristimulus values XYZ 4: Tristimulus values XYZ, Chromaticity xy
5: Tristimulus values XYZ, Chromaticity u’v’
6: Correlated color temperature, Deviation
7: Spectral radiance(380nm – 780nm)
8: Wavelength, Maximum Spectral radiance
Change the CIE Color Matching function (Type) setting.
For the pound sign (#), use 0 for CIE1931 and 1 for CIE170-2:2015.
Reads the CIE Color Matching function (Type).
The instrument is stops measuring.
If the instrument is measuring, immediate measurement is stopped.
Measurement data is not returned. If it is not during measurement, a reception
confirmation command is returned.
"_" shows space. "####" means a numerical value.
When the computer transmits the communication command, the SR-LEDW/SR-UL2/SR-
UL1R/SR-3AR returns "OK" as the reception check command. When the SR-LEDW/SR-UL2/SR-
UL1R/SR-3AR receives an improper command, it returns "NO".
To Next Page
Loading...
