Topcon TRK-1P - Page 44

43
PREPARATIONS
SETTING THE INSTRUMENT No.
The instrument No. can be set between 0 and 99. Before shipment, it is set to "01."
1 In the "INITIAL MENU screen," select "INITIAL SET" and get the "INITIAL MENU screen."
2 Press the Set item change button and bring the cursor to "INSTRUMENT No.
INPUT."
3 Press the Set value change button to decrease the value, or to increase.
4 Press the Set item change button ; the cursor moves to the next item.
DISPLAYING THE INSTRUMENT No.
The instrument No. can be displayed on the monitor screen. Before shipment, it is set to
"OFF" (do not display).
1 In the "INITIAL MENU screen," select "INITIAL SET" and get the "INITIAL MENU screen."
2 Press the Set item change button and bring the cursor to "INSTRUMENT No. DIS-
PLAY."
3 Press the Set value change button or and select "ON" (display) or "OFF" (do
not display).
4 Press the Set item change button ; the cursor moves to the next item.
Press the , and the cursor moves to the next INSTRU-
MENT No.'s digit to input.
MEASUREMENT switch