48
PREPARATIONS
5 Press the Set item change button ; the cursor moves to the next item.
SETTING THE DISPLAY UNIT OF OCULAR PRESSURE MEASUREMENT VALUES
The unit of ocular pressure measurement values displayed on the monitor screen can be
selected from mmHg, digit, hPa or Torr. Before shipment, it is set to "mmHg."
1 Select "INITIAL SET" of the INITIAL MENU screen and get the INITIAL SET screen.
2 Press the Set item change button and bring the cursor to "UNIT SELECT." The dis-
play unit of ocular pressure measurement values is displayed on the right, and the set unit
is highlighted.
3 Press the Set value change button or and bring the cursor to the desired unit
of display unit of ocular pressure measurement values:
mmHg : The display unit of measurement values is set to mmHg.
digit : The display unit of measurement values is set to digit.
hPa : The display unit of measurement values is set to hPa.
Torr : The display unit of measurement values is set to Torr.
4 Press of the Set item change button and move the cursor to the next item.
The count can be set between 1 and 10.
The same count is set for REF and KRT.
If different counts are set for TONO and PACHO when the measurement mode is
set at T/P, measurement repeats respectively as specified.
To Next Page
Loading...
Need help?
General
