Topcon TRK-1P User Manual

55
PREPARATIONS
CHANGING THE PRINTING SEQUENCE KERATOMETRY MEASUREMENT VALUES
The sequence of displaying the cornea refractory power and curvature in the printout can be
changed. Before shipment, the setting is "D/MM" (print diopter value first)
1 In the "INITIAL MENU screen," select "PRINT OUT" and get the "PRINT OUT screen."
2 Press the Set item change button and bring the cursor to "KRT DATA ORDER."
3 Press the Set value change button or and select "D/MM" (print diopter value
first), or "MM/D" (print mm value first).
4 Press the Set item change button ; the cursor moves to the next item.
PRINTING CORNEAL ASTIGMATISM AND AXIS
The corneal astigmatism and AXIS can be printed out. Before shipment it is set to "ON" (print
corneal astigmatism and AXIS).
1 In the "INITIAL MENU screen," select "PRINT OUT" and get the "PRINT OUT screen."
2 Press the Set item change button and bring the cursor to "KRT CYL PRINT."
3 Press the Set value change button or and select "ON" (print corneal astigma-
tism and AXIS), or "OFF" (do not print corneal astigmatism and AXIS).
4 Press the Set item change button ; the cursor moves to the next item.

Topcon TRK-1P Specifications

General

Brand	Topcon
Model	TRK-1P
Category	Medical Equipment
Language	English