Topcon TRK-1P - Setting the Measurement Mode Under REF;KRT Mode

56
PREPARATIONS
CHANGING THE PRINTING SEQUENCE
The sequence of display in the printout can be changed. Before shipment, it is set to "DATA"
(print REF and KRT values separately).
1 In the "INITIAL MENU screen," select "PRINT OUT" and get the "PRINT OUT screen."
2 Press the Set item change button and bring the cursor to "PRINT R/L."
3 Press the Set value change button or and select "DATA"(print REF and KRT
values separately), or "R/L" (print right and left eyes in order irrespective of REF/KRT).
4 Press the Set item change button ; the cursor moves to the next item.
PRINTING THE BARCODE
The barcode can be printed out. Before shipment, it is set to "OFF" (do not print barcode).
1 In the "INITIAL MENU screen," select "PRINT OUT" and get the "PRINT OUT screen."
2 Press the Set item change button and move the cursor to "BARCODE PRINT."
3 Press the Set value change button or and select "ON" (print barcode) or
"OFF" (do not print barcode).
4 Press the Set item change button ; the cursor moves to the next item.