62
PREPARATIONS
SELECTING THE OUTPUT DATA FORMAT
The output data format can be selected. Before shipment, it is set to "REF."
1 In the "INITIAL MENU screen," select "ON-LINE" and get the "ON-LINE screen."
2 Press the Set item change button and bring the cursor to "OUTPUT DATA TYPE."
3 Press the Set value change button or and select:
REF (output REF measurement data only),
KRT (output Kerato measurement data only),
R/K (output REF and KRT data),
TONO (output ocular pressure measurement data only),
PACHO (output cornea thickness measurement data only),
T/P (output ocular pressure measurement and cornea thickness measurement
data), or
ALL (output all data, REF measurement/Kerato measurement/ocular pressure
measurement/cornea thickness measurement)
4 Press the Set item change button ; the cursor moves to the next item.
To Next Page
Loading...
