Toshiba B-EX4 SERIES - Page 147

5. SYSTEM MODE EO18-33027
5.5 ADJUST SET
5-51
(1) Idling
(2)
Completes printing the first label (A).
(3)
Feed
s the label to the cut position, then cuts
the gap at the front of label (A).
(4) Back feeds to the home position.
(5)
Completes printing the second label (B).
(6)
Feeds the label to the cut position, then cuts
the gap at the front of label (B).
(7) Back f
eeds to the home position.
(8) To eject label (B), feeds the third label (C).
(9) Feeds the label to the cut position, then cuts
the gap at the front of label (C).
(10)
Back feeds to the home position.
（ｂ）Operation example
Issue count: 2, Cut interval = 1
Cut position Head position
▼ ▼
A
B
A
B
A
B
C
C
A
B
C
A
B
C
A
B
C
A
B
C
B
B
B
A
A
A
C
C
C