9. MAJOR UNIT REPLACEMENT EO18-33027
9.8 PLATEN
9-19
7) Replace the platen with a new one, then reassemble in the reverse order of removal.
NOTES:
1. When reassembling the platen, be sure to attach all of the following parts to the printer.
2. Apply FLOIL to the platen pulley before installing the platen.
3. When installing the platen, first fully insert the pulley into the printer. Also make sure that the platen
holder cover is fixed with the hook.
Platen
Platen
Pulley
Platen
Strip Plate
Collar
Platen Holder
Platen Holder Cover
To Next Page
Loading...
