Toshiba B-EX4 SERIES Service Manual

10. RFID ANALYZE TOOL EO18-33027
10.3 Application Functions
10- 8
(2) CommSetting
Makes settings for communication between the PC and the printer.
NOTES: 1. In the case of the LAN interface, a socket communication is used.
2. Serial port may not be selectable depending on the printer types.
3. The above settings can be saved by a parameter save function.
(3) Internal Serial Setting
Makes settings for communication between the RFID module and the printer. Do not change the setting.
Port: COM1 to COM9
Baudrate: 2400, 4800, 9600,
19200, 38400, 115200
Data bit: 8 bit
Parity: NONE, EVEN, ODD
Stop bit: 1, 2
Flow control: NON, XON, XON/XOFF,
RTS/CTS+XON/XOFF
Baud
rate: 2400, 4800, 9600,
19200, 38400, 115200
Data bit:
7 bit, 8 bit
Parity: NONE, EVEN, ODD
Stop bit: 1, 2
Printer IP Address
Socket Port No.

Toshiba B-EX4 SERIES Specifications

General

Print Technology	Thermal Transfer / Direct Thermal
Power Supply	AC 100-240V, 50/60 Hz
Print Resolution	203 dpi
Max Print Width	104 mm
Connectivity	USB, Serial, Ethernet
Media Sensor	Transmissive, Reflective
Media Type	Roll, Fanfold, Tag, Ticket
Media Width	25.4 mm
Ribbon Width	110 mm
Ribbon Length	Up to 600 m
Media Thickness	0.06 – 0.19 mm