Connecting AC Power to UL Recognized ESD Power Supply
4–16 iSTAR eX Installation and Configuration Guide
iSTAR eX UL System Configuration
Standard or NPS Version (External Power)
In order to maintain a UL Listing, the system must be powered by a UL
Recognized ESD power supply (with a 17.2 Ah or 18 Ah battery) or a UL 603
Listed, power-limited power supply with appropriate ratings and a minimum
4 hours of standby power. Figure 4.10 shows a UL approved iSTAR eX
configuration.
Figure 4.10: iSTAR eX UL System Configuration with Standard or Alternate Power Supply
To Next Page
Loading...
