iSTAR eX Connections
iSTAR eX Installation and Configuration Guide 4–17
iSTAR eX Connections
The following types of iSTAR eX connections are available, as shown in
Figure 4.11 on page 4-18:
Input connector – associates a security device with an input on iSTAR eX
or add-on module board.
Output connector – associates an event or input with a relay on iSTAR eX
or add-on module board.
Read head connectors – Direct connect Wiegand signaling read heads,
RM reader modules, and Wyreless PIMS.
To Next Page
Loading...
Need help?
General
