Connecting to the iSTAR Web Page Diagnostic Utility
5–38 iSTAR eX Installation and Configuration Guide
Disabling Web Diagnostics
Web Diagnostics are enabled by default. You can, however, disable Web
Diagnostics for selected iSTAR controllers running firmware version 4.0.0 and
higher.
To disable Web Diagnostics
1. In the ICU Controller list, select an iSTAR controller that is running
firmware version 4.0.0 or greater.
2. Right-click the controller and select Edit Controller Information.
3. Select the Advanced tab, shown on Figure 5.9 on page 5-30.
4. In the Web Diagnostics box, clear the Enabled check box and click OK.
To Next Page
Loading...
