Tyco iSTAR eX User Manual

Preface
xiv iSTAR eX Installation and Configuration Guide
How to Use this Manual
This manual contains the following information:
Table 1: Manual Contents
Chapter/Appendix Title Description
Chapter 1 Introducing iSTAR eX Provides basic information about iSTAR eX, and includes
an overview of iSTAR eX hardware, features, and
configuration tools.
Chapter 2 iSTAR eX Topology Provides the information that you need to set up
iSTAR eX controllers for network communications.
Chapter 3 Site Requirements Provides physical requirements for iSTAR eX
configuration.
Chapter 4 Hardware Installation Gives an overview of the iSTAR eX hardware installation
and provides step-by-step installation procedures.
Chapter 5 Using the iSTAR
Configuration Utility (ICU)
Provides instructions for configuring iSTAR eX controllers
using the iSTAR Configuration Utility (ICU).
Chapter 6 iSTAR eX Web Page
Diagnostic Utility
Describes how to monitor controllers and run controller
diagnostics.
Chapter 7 iSTAR eX LCD Diagnostic
Utility
Describes how to monitor controllers and run controller
diagnostics.
Appendix A iSTAR eX Controls and
Indicators
Describes the LEDs and indicators on iSTAR eX General
Controller Module (GCM) and Power Management Board
(PMB) components.
Appendix B Part Numbers Contains part numbers for iSTAR eX components.
Appendix C Maintenance and Diagnostics Contains maintenance and diagnostic procedures.
Appendix D Wire Routing Diagrams Contains wire routing diagrams.

Tyco iSTAR eX Specifications

General

Brand	Tyco
Model	iSTAR eX
Category	Controller
Language	English