Tyco iSTAR eX - Monitoring Station

iSTAR eX - Support for iSTAR eX 8 Reader Option
4–42 iSTAR eX Installation and Configuration Guide
8 Reader Option - Minimum Requirements:
 C•CURE 800 version 9.4 or C•CURE 9000 version 1.91.
 iSTAR eX firmware 4.4
 ICU version 4.4.0
Monitoring Station
1. The C•CURE Monitoring Station displays the status of the eX 8 Reader
Security Key - Installed or Removed. The eight reader option is active
when the Security Key is inserted in the USB port. If the key is removed,
readers #5 - #8 will be non-operational.
NOTE
If the iSTAR eX 8 Security Key is not inserted in the USB port, readers #5-8
will be unavailable.
If you remove the iSTAR eX 8 Security Key, readers #5-8 will be
non-operational while the key is unplugged. If you re-insert the Security
Key in the USB port, the readers will be available.