iSTAR eX Diagnostic Tests
iSTAR eX Installation and Configuration Guide 7–7
Port and CF Slot Test
The onboard Ethernet tests display diagnostic information about Ethernet
connections.
To test the Ethernet ports, set switch SW1 to the position shown in Table 7-7.
Table 7-7: Ethernet Test Switch Settings
Table 7.6: Input Test Switch Settings
Switch Position Function
SW1-3 Two-second LED input change display is on (slow
mode)
SW1-4 One-second LED input change display is on (fast
mode)
Switch
Position
Function
SW1-8 Tests the Ethernet #1 and Ethernet #2 ports
To Next Page
Loading...
